Power Acoustik RE4-2000D 2000 Watt 4-Channel Car Amplifier
4 Channel Full Range Operation 2-Ohm Stable Class A/B Amplifier
MAX Power: 2000 Watts
4 Ohm RMS: 175 Watts x 4
2 Ohm RMS: 250 Watts x 4
4 Ohm RMS Bridged: 500W x 2
Direct Short, Thermal, & Overload Circuits Protection
200mV-6V High Level or Low Level RCA Input
Tri-Mode Capable
Variable 12dB High, Low, & Subsonic Crossovers
Variable 12dB Band-Pass Crossovers
Direct Wire 4ga. Power & 12ga Speaker Terminals
Product Dimensions (L x W x H): 13″ x 8.5″ x 2.2″ inches
Power Acoustik RE4-2000D 2000 Watt 4-Channel Car Stereo Amplifier Amp
$1195
1 in stock
Description
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
POWER ACOUSTIK PWM-19 PRE AMP
Prestigious and most experienced model yet for us! Maybe you’ve got an older car stereo system that you want to get more from. Or perhaps you’ve got an all-new setup that you want to get the maximum out of. In either case, Power Acoustik EQs will let you fine-tune your sound, along with independent master volume, subwoofer level, and fader controls that’ll maintain your highs and lows in balance.
The PWM-19 features (2) RCA inputs, so you can connect them to your aftermarket system. The RCA outputs ensure that your amplifiers will get a clean, powerful signal for maximum performance.
DS18 CANDY-X1B Compact Class D Monoblock Amplifier 1800 Watts
| Model: | CANDY-X1B |
| Number of Channels: | 1 |
| Frequency Response: | 20Hz - 150Hz |
| MAX Power: | 1800W |
| 1 Ohm RMS Power (14.4V) Per Channel: | 1 x 600W |
| 2 Ohm RMS Power (14.4V) Per Channel: | 1 x 400W |
| 4 Ohm RMS Power (14.4V) Per Channel: | 1 x 240W |
| Speaker Impedance Range: | 1 Ohm |
| Input Sensitivity: | 0.2V-+6V |
| Low Pass Filter: | 50Hz - 150Hz |
| Fuse Size: | 2 x 35A |
| Signal-To-Noise Ratio: | 100 dB |
| THD: | 0.01% |
| Bass Boost: | 0dB-+18dB |
| Product Dimensions (LxWxH): | 220 x 127 x 47.5mm |
DS18 GEN-X1600.4 Full Range Class AB 4 Channel Amplifier 1600 Watts
| Model: | GEN-X1600.4 |
| Number of Channels: | 4 |
| Frequency Response: | 20Hz - 20KHz |
| Max Power: | 1600W |
| 2 Ohm RMS Power (14.4V) Per Channel: | 4 x 120W |
| 4 Ohm RMS Power (14.4V) Per Channel: | 4 x 80W |
| 4 Ohm RMS Power Bridge (14.4V) Per Channel: | 2 x 200W |
| Speaker Impedance Range: | 2-8 Ohm |
| Input Sensitivity: | 0.2V-+6V |
| Low Pass Filter: | 50Hz - 500Hz |
| High Pass Filter: | 50Hz - 500Hz |
| Fuse Size: | 2 x 25A |
| Signal-to-Noise Ratio: | 98dB |
| THD: | 0.01% |
| Product Dimensions (L x W x H): | 430 x 190 x 55mm |
Reviews
There are no reviews yet.